HYPERION ULTIMATE PDB POWER HUB W/ STOSD8, 140A CURRENT SENSOR & 5V/12V SELECTABLE BEC

Hyperion quality products!

The Hyperion Ultimate PDB Power Hub with STOSD8 has been designed as an all in one power source . It can power all the devices on your platform from a single input. It acts as a multifunctional HUB and made from 4 layered PCB. Specially made for the mini FPV Quads. Small size no extra wiring needed. The 12V BEC is linear regulated, no LC Filter needed. Built-in STOSD8 support. Totally Plug & Play, no complicated settings needed.

Features:

• 3-5s lipo support
• Built-in STOSD8 tool
• Plug & play
• Compact and light, perfect for Mini and micro fpv quads

PDB (ESC outputs):

• Continuous current: 30A per output
• Peak current (10 seconds/minute): 35A per output

BEC 5V outputs:

• Designed for RC Receivers, Flight controllers, OSD, and Servos
• DC/DC synchronous buck regulator
• Voltage: 5.0 +/- 0.1VDC
• Continuous current: 2 Amps (Max.2.5A 10s/minute)
• Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
• Short-circuit tolerant (5 seconds/minute)

BEC 12V outputs:

• Linear regulator, very low noise
• Designed for Video TX or FPV camera
• Voltage: 12.0 +/- 0.3VDC (4~5S operation)
• Continuous current: 500mA@16V IN, 400mA@20V IN
• Short-circuit tolerant (2 seconds/minute)
• If the battery is 3S LiPo, Output voltage=3S LiPo voltage - 1V

Current Sensor 140A:

• If current >140A. STOSD display 140A

LED indicator function:

• Blue LED blinks: STOSD is initializing
• Blue LED constant: STOSD is working

Included with the package:

• HUBOSD x 1

Specifications:

• Input voltage range (3S-5S lipo): 8 - 21VDC
• PDB: 4x30A (Max.4x35A)
• Regulated 5V and 12V outputs
• Current Sensor 140A
• Built-in STOSD8
• 2oz copper, 4-layered 1.6mm PCB
• 1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 12V outputs
• Camera signal & Gnd pads, Video Transmitter Signal & Gnd pads
• 1x Serial port (RX, TX, G)
• Dimensions: 46x36x4mm
• Weight: 8.5g
• Mounting holes 30.5mm square spacing,?3mm