HOBBYWING EZRUN MAX10 G2 Combo

*Waranty only applicable at Hobbywing directly* *Garantie Applicable chez Hobbywing seulement*

Features

• The EzRun Max10 G2 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of control feel and perfectly matches the EzRun 3652/3665 SD G3 motors.
• Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more with greater effect.
• The smart start-stop technology is introduced to the Max10 G2 ESC. The frameless fan will not be enabled to reduced noise and saving power. The fan will only work when the temperature rises to a certain level.
• Compared with the previous generation of the MAX10 ESC, the total capacitance of the capacitor is increased by 74% and is overheating protected. The functions improve the power delivery from the battery to the ESC to avoid it from overloading and causing capacitors to explode.
• Smart freewheeling technology enables the MAX10 G2 to have higher drive efficiency than the previous generation, resulting in lower operating temperatures and a minimum temperature of approximately 25°C lower than the previous generation.
• After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging.
• The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit.

EZRUN 3652 Sensored Brushless motor - Generation 3

EZRUN 3665 SD Brushless G3

 Specification
ESC

ESC	MAX10 G2 80A	MAX10 G2 140A
Scale Vehicles	1/10 On-road/Off-road Short Course Truck(Light-duty)	1/10 Short course car, Truck, Monster truck
Cont./Peak Current	80A/520A	140A/880A
Motor Mode	Sensored and sensorless brushless mode	Sensored and sensorless brushless mode
Input	2-3S Lipo	2-4S LiPo
Motor Limit	2S Lipo: KV≤ 6000 (3652) 3S Lipo: KV≤ 4200 (3652)	3S Lipo: KV≤ 4000 (3665) *4S Lipo: KV≤ 2600 (4268)
BEC Output	6V / 7.4V adjustable, continuous current 5A (Switch-mode)	6V / 7.4V adjustable, continuous current 5A (Switch-mode))
Programming Port	Independent	Independent
Power Connection	XT60	XT60
ESC Programming	Same	Same
Switch Mode	Same	Same
Capacitor protection	Yes	Yes
Waterproof	Yes	Yes
Size (L.W.H) mm	53 x 39.5 x 37.2mm	53 x 39.5 x 37.2mm
Weight g	120g (with wires)	120g (with wires)

* unless you are absolutely sure that the perfect gear ratio after pairing a 4268 motor with 4S, this setting is not recommended. 

Ezrun 3652 SD motor

 

P/N	Model	KV	LiPo	No-load Current (A)	Shaft Diameter  Length (mm)	Poles	Weight
30402606	Ezrun 3652 G3	5400KV	2S	≤6.8A	φ=3.175mm (0.125in) L=15mm (0.59in)	4	227.1g
30402605	Ezrun 3652 G3	4100KV	2S-3S	≤5.0A	Same	4	227.9g
30402603	Ezrun 3652 G3	3300KV	2S-3S	≤3.9A	Same	4	228.3g

 

Ezrun 3665 SD motor

 

P/N	Model	KV	LiPo	No-load Current (A)	Shaft Diameter  Length (mm)	Poles	Weight
30402608	Ezrun 3665 G3	4000KV	2S-3S	≤8.2A	φ=5mm (0.2in)	4	297.2g
30402607	Ezrun 3665 G3	3200KV	2S-3S	≤7.1A	Same	4	304.4g
30402604	Ezrun 3665 G3	2400KV	2-4S	≤5.2A	Same	4	304.5g

EZRUN MAX10 G2 Combo